Charging the battery, Charging, Using battery power – Kodak S730 User Manual

Page 17: Monitoring battery charge level

Advertising
background image

Getting started

www.kodak.com/go/support

11

Charging the battery

Your frame’s rechargable battery was installed at the factory.

Charging

Plug the frame in and leave the power connected for at least 3 hours.

The battery automatically charges when the AC power adapter is connected. You
don’t need to turn the frame on.

Using battery power

Because the battery may be fully discharged when you unpack your frame, you
must charge the battery for at least 3 hours before running the frame on battery
power.

Unplug the AC adapter and share your pictures at a party or wedding, or take your
frame to an outdoor event where AC power is unavailable.

Your frame can run for up to an hour* on battery power.

*Battery life may vary. Factors that may adversely affect battery life include playing
videos, playing audio files, using a high volume setting, and using a high screen
brightness setting.

Monitoring battery charge level

The battery icon indicates the charge level.

NOTE: If your frame hasn’t been plugged in to AC power for a long time (more than a year), you may need

to refresh the battery to fully charge it. See

Refreshing the battery, page 39

.

Full charge

1/2 charge

Empty—icon blinks for 5 seconds, then the frame turns off. Plug in the AC adapter
and charge the battery.

Advertising
This manual is related to the following products: