Kodak INTRAORAL 1500 - Manual (Page 26)

18 Chapter 3 Getting Started
Inserting the Cable into a Wired Camera
To insert the cable into a wired camera, hold the camera in one
hand and insert the cable end into the bottom of the camera.
Make sure the cable is locked into place.
Figure 9 Inserting the Cable
To release the cable, press the Cable Release button and gently
pull the cable out.
Setting up the Camera Holder
To set up the camera holder, follow these steps:
1 Select a smooth, flat, accessible area.
2 Clean the surface.
3 Remove the double-sided tape protection from the support
(2).
4 Place the taped side of the camera holder on the cleaned
surface and press firmly several times. Leave for two hours.
Cable Release
button