Kenwood XXV-05V - Manual (Page 62)

Setup Menu
AV Interface
You can set audio and visual (AV) interface parameters.
Displaying the AV I/F 1 screen
AV I/F 1 screen
AV Interface
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 76)
4 Calls the Setup Menu.
5 Selects a navigation system connection. ( RGB)
"RGB": Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
"OFF": Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is
switched.)
6 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
( VIDEO1)
If you have set the navigation system connection to
"AV IN1", the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. ( Normal)
"Normal" When the image source is switched,
an image entered via the AV INPUT2
port is displayed.
"AUTO": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
"R-ViewCAM": An image entered via the AV INPUT2
port is displayed when the shift lever
of the car is placed in the Reverse
position.
8 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. (
VIDEO2)
If you have selected the "R-ViewCAM" display for
the AV INPUT2 port, the "R-ViewCAM" is always
selected.
9 Displays the AV I/F 2 screen.
If is not shown, touch
or to display it.
Next
Prev. AV Interface
62 English
Normal No N rma mal ma N
1
1
1
1
4
7 7
8 8
9
5 5
6 6
3
2