Konica Minolta NS-42E570A11 User Manual
Page 43
39
Insignia 42"/46" LED-LCD TV, 120Hz 1080p
www.insigniaproducts.com
Picture
No picture
•
Make sure that the Audio Only option is
set to Off. See “Playing TV audio only” on
page 20.
•
Make sure that the video cables are
connected securely to the back of your TV.
See “Making connections” on page 10.
•
Adjust the contrast and brightness. See
“Adjusting the TV picture” on page 16.
•
Make sure that the correct video mode is
selected. See “Selecting the video input
source” on page 14.
•
Make sure that the incoming signal is
compatible.
•
Make sure the antenna is connected
correctly. See “Connecting an antenna or
cable TV (no box)” on page 10.
•
Check the closed caption settings. Some
TEXT modes can block the screen. See
“Selecting the closed captioning mode”
on page 27.
Good sound but poor color
•
Adjust the contrast, color, and brightness
settings. See “Adjusting the TV picture”
on page 16.
Poor picture
•
Make sure that the room is not too bright.
Light reflecting off the screen can make
the picture difficult to see.
•
If an S-VHS camera or a camcorder is
connected while another connected
device is turned on, the picture may be
poor. Turn off one or more devices.
Horizontal dotted line
•
Your TV may be too close to another
electrical device, such as a hair dryer or
neon light. Turn off the device or move
your TV.
“Ghost” or double image
•
Obstructions, such as a high-rise building
or hills, may be preventing your antenna
from receiving a clear signal. Using a
highly directional antenna may improve
the picture quality.
Snowy picture or noise
•
Make sure that the AV and antenna cables
are connected securely.
VGA picture is not stable or
synchronized
•
Make sure that you have selected the
correct VGA mode on your computer.
After images appear
•
Do not display a still image, such as a logo,
game, or computer image, for an
extended period of time. This can cause a
permanent after-image to be burned into
the screen. This type of damage is not
covered by your warranty.
Picture has a few bright or dark
spots
•
A few bright or dark dots on an LCD screen
is normal. It does not affect the operation
of this TV.
Audio
Good picture but no sound
•
Increase the volume.
•
Make sure that the sound is not muted.
•
Make sure that the correct audio mode is
selected. See “Adjusting sound settings”
on page 19.
No output from one of the
speakers
•
Adjust the balance in the Audio menu. See
“Adjusting sound settings” on page 19.
Other
Problem
Solution
Buttons on the front of the TV
do not work
•
Make sure that the Button Lock option is
set to Off. See “Locking control buttons”
on page 24.
•
Unplug the power cord, wait a few
seconds, then plug the cord back in and
turn on your TV.
INlink does not work
•
Make sure that the device you want to
control is HDMI CEC-compatible.
•
Make sure that the HDMI device’s power
cord is connected correctly.
•
Make sure that the INlink Control option is
set to On in the INlink menu. See “Using
•
Scan for INlink devices again. See “Using
INlink” on page 32.
•
Connect an INlink device using an
HDMI 1.3 cable.
•
If it the HDMI cable is disconnected then
reconnected or if the power is turned off
scan for INlink devices again. See “Using
INlink” on page 32.
Problem
Solution