Konica Minolta NS-42E570A11 - Manual (Page 17)

13
Insignia 42"/46" LED-LCD TV, 120Hz 1080p
www.insigniaproducts.com
Connecting an analog sound system
To connect an analog sound system:
• Connect a standard audio cable to the AUDIO
OUT L and R jacks on the back of your TV and to
the AUDIO IN jacks on the sound system.
Turning on your TV for the
first time
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time mode, picture mode, and TV signal
source.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 8 for details).
• Connected an antenna, cable TV, or satellite
TV. (See page 10 for details.)
• Connected the power cord. (See page 10 for
details.)
2 Press (power) to turn on your TV. The Choose
your menu language screen opens.
3 Press or to highlight English, Francais, or
Español, then press OK/ENTER. The Time screen
opens.
4 Press or to select Auto or Manual, then
press OK/ENTER.
5 Press or to highlight Time Zone, then press
or to select your time zone. You can select
Eastern, Central, Mountain, Pacific, Alaska,
Hawaii, Atlantic, or Newfoundland.
6 Press or to highlight Daylight Savings,
then press or to select On (if your viewing
area observes Daylight Savings Time) or Off (if
your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date
by pressing or to highlight Year, Month, or
Day, then press or to adjust the setting.
8 If you selected Manual for Mode, set the time
by pressing or to highlight Time, then
pressing or to select the hour, minute, or
AM/PM field. Press or to adjust the setting.
Note:
If you connect the audio output from a DVD player,
VCR, set top box, cable box, satellite box, game
console, or other video device directly to an amplifier
without passing the audio through your TV set, you
need to fine-tune the lip/audio sync on the amplifier
to synchronize the video.
Back of TV
Analog sound system
Notes
• If you set the time mode to Auto, the date and
time are set based on a time signal received
from a DTV channel, and the only options you
can adjust are Time Zone and Daylight Savings.
• You can change the menu language or scan for
channels at a later date. For more information,
see “Adjusting the menu transparency” on
page 30, “Selecting the menu language” on
page 31, or “Automatically scanning for
channels” on page 20.
MENU EXIT OK
ENTER
Choose your menu Language
English
Français
Español
MOVE SELECT PREVIOUS EXIT
Set menu language to English, Français, or Español
MENU EXIT OK
ENTER
If Automatic, options are automatically set by TV source
Time
o t u A e d o M
Newfoundland
On
2010
Jan
1
12 : 01 AM
Time Zone
Daylight Savings
Year
Month
Day
Time
MOVE SELECT PREVIOUS EXIT