Kenwood KDC-138 - Manual (Page 12)

12 | KDC-MP238/CR/KDC-MP208/KDC-138/CR
Menu Operation
Function of KDC-MP238/KDC-MP238CR/KDC-MP208
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary
input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the “AUX” display.
2 Enter Menu mode
Press the [B.BOOST] button for at least 1
second.
“MENU” is displayed.
3 Select Auxiliary input display setting mode
Press the top or bottom side of the Control
knob.
Select the “NAME SET” display.
4 Enter Auxiliary input display setting mode
Press the center of the Control knob for at least
1 second.
The presently selected Auxiliary input display is
displayed.
5 Select the Auxiliary input display
Press the right or left side of the Control knob.
Each time you push the knob, the display alternates
as listed below.
• “AUX”
• “DVD”
• “PORTABLE”
• “GAME”
• “VIDEO”
• “TV”
6 Exit Auxiliary input display setting mode
Press the [B.BOOST] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used.
Function of KDC-MP238
Receive mode Setting
Setting the receiver mode.
1 Select the Receive mode
Press the top or bottom side of the Control
knob.
Select the “HDR MODE” display.
2 Enter Receive mode
Press the center of the Control knob for at least
1 second.
3 Set the Receive mode
Press the top or bottom side of the Control
knob.
Receive mode Display Operation
Auto mode “AUTO” Automatically tunes to analog
broadcast when there is no digital
broadcast.
Digital “DIGITAL” Digital broadcasts only.
Analog “ANALOG” Analog broadcasts only.
4 Exit Receive mode
Press the [B.BOOST] button.
Function of KDC-MP238/KDC-MP238CR/KDC-MP208
Demonstration mode Setting
Sets the demonstration mode.
1 Select the Demonstration mode
Press the top or bottom side of the Control
knob.
Select the “DEMO” display.
2 Set the Demonstration mode
Press the center of the Control knob for at least
2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Exit Demonstration mode (Normal mode).