Konica Minolta BIZHUB 164 - Manual (Page 53)

bizhub 164 5-7
5.3 Application settings ([COPY FUNCTION]) 5
5.3 Application settings ([COPY FUNCTION])
Configure the application settings for making copies.
For each finished copy image, refer to page 5-3.
For details on the basic copy operations, refer to page 3-7.
To return to the basic screen after the application settings are set, press the Back/Stop/Reset key until the
basic screen appears.
5.3.1 [ID COPY]
The image of the front and back sides of a card, for example, a driver’s license is copied onto a single sheet
of paper. The image of the side scanned first is temporarily stored and that of the other side scanned later is
placed beside the first one to produce a copy on a single sheet of paper.
0 Place the original so that its top side faces the left side of the machine.
0 Position the original 4 mm (3/16 inches) away from the Original Scale.
%
Press the Menu/Select key ö [COPY FUNCTION] ö [ID COPY] ö [ON].
Item
[ID COPY] The image of the front and back sides of a card, for example,
a driver’s license is copied onto a single sheet of paper. p. 5-7
[COMBINE ORIGINAL] Multi-page originals can be reduced in size and copied onto a
single sheet of paper. p. 5-8
[SORT] When multi-page originals are copied into multiple sets, the
copies are fed out into sets, each set containing a copy of
each page of the originals. p. 5-10
[ERASE] Copies can be produced by erasing unnecessary areas
around the original text. p. 5-11
[BOOK SEPARATION] A double-page spread original such as a book or magazine is
copied onto two separate pages. p. 5-12