Kodak ESP 9 - Manual (Page 75)

www.kodak.com/go/aiosupport 67
Kodak ESP 9 All-in-One printer
Dialing a fax number on the control panel
1. Load the original (plain paper only) in the automatic document feeder (ADF) or
the scanner glass. See Loading an original for faxing, page 49 .
2. From the control panel, press Menu .
3. Press to select Send Fax .
4. Enter a number on the number keypad using the correct fax number for the
recipient.
The number displays on the LCD screen, as shown in the illustration below.
NOTE: The Send Fax menu will display all Fax Phonebook (fax Number and Quick
Dial entries) names that match the string of numbers you press on the
number keypad. For example, if you press 123 , the LCD screen displays all
entries starting with 123 .
5. Press Start to send the fax.
Selecting a fax recipient from the fax phonebook
1. Load the original. As appropriate review Preparing a fax for transmission,
page 72 .
2. From the control panel, press Menu .
3. Press to select Send Fax and then press OK .
The list of Fax Phonebook entries displays in the Send Fax menu. The last Fax
number selected is shown above the
Fax Options menu. See the example, below.
4. To use the last fax number used, press Start now. Otherwise, press until the
desired recipient is selected, and then press OK .