Kyocera 3250 - Manual (Page 16)

8 Using Push To Talk
2 U SING P USH T O T ALK
The Push To Talk (PTT) feature on your Kyocera 3250
phone allows you to quickly communicate with an
individual or group. Once connected, simply press and
hold your phone’s Walkie-Talkie (WT) button to
communicate.
Note: You can only use the PTT feature with other PTT-
compatible phones.
Tip: When using your phone as a walkie-talkie radio,
hold the phone in a vertical position with the
speakerphone at a minimum of one to two inches
(2.5 to 5 cm) away from your mouth.
Making PTT calls
There are five ways to make PTT calls:
1. Press the WT button to access the Push To Talk
main menu on the phone. Enter the 10-digit phone
number on the keypad.
2. Select a PTT contact by choosing Menu →
Push To Talk → PTT Contacts. Highlight the
contact you want to call.
3. Select a PTT contact by choosing Menu →
Recent Calls .
4. Select Incoming Calls , Outgoing Calls , or Missed
Calls . Highlight the contact you want to call. For
more about Recent Calls, see page 18.
5. Select a PTT contact by choosing Menu
→
Contacts . Select View Phone List or Find Name to
find the contact you want to call. Highlight the
contact to call. For more about Contacts, see
page 31.
You can also make a group PTT call using the phone’s
PTT groups list. See page 11.
Making a private PTT call
1. Press and hold the WT button. The “Ready to
Speak” tone sounds when the audio path is ready
and the contact is available.
Note: If the contact is unavailable or offline, the
“Bong” tone sounds.
2. Speak your message while continuing to press the
WT button.
3. Release the WT button when finished speaking
your message. This allows the called recipient to
reply.
82-K5960-1EN.book Page 8 Monday, May 3, 2004 10:47 AM