Kawasaki 840168 - Manual (Page 12)

Collets: Collets of various sizes are used to
accommodate accessories with different-sized
shanks. Refer to the section on Collet Sizes for
instructions on changing the collet.
Threaded-tip shanks: Threaded-tip shanks
are used for felt polishing wheels. Shanks
with a long threaded tip are used for pointed
polishing wheels while shanks with short
threaded tips are used for round felt polish-
ing wheels. To install a felt polishing wheel,
simply screw it onto the threaded shank.
Screw shanks: Screw shanks are used for
mounting cutting wheels.
Sanding band shanks: Sanding band shanks
feature an expanding core that hold dispos-
able bands securely. To contract the core to
remove or install a band, loosen the screw.
Tightening the screw expands the core.
22
Failure to follow all the warnings for using attachments
listed in the front of this manual could cause the cutting wheel to fragment,
causing serious injury.
Grinding stones: Use these
stones for smoothing hard mate-
rials such as wood, plastic, and
metal. Be sure not to allow the
work piece to overheat as this can
cause charring (wood), melting
(plastic), or discoloration (metal).
Aluminum oxide (red) acces-
sories are best for wood, metals,
and plastics, while silicon carbide
(blue) accessories are best for
very hard surfaces such as glass.
Cutting bits: Use cutting bits for shaping various
materials. The smallest cutting bits are suitable for
use in engraving.
Polishing wheels: These accessories are useful for
removing tarnish and weathering on metal and for pol-
ishing plastics. They require a special shank with a screw
tip. To prepare a polishing wheel, screw the felt onto the
shank tip. Reverse to remove. Polishing grease can be
used in small quantities to aid in polishing metal. Lower
speeds are best for these accessories.
Router bits: An assortment of router bits
is available for purchase from your
hardware or home center retailer. These
accessories carve patterns in wood and
plastic that can be used for ornamental
purposes or for joining (such as when
cutting a dado).
21