Kawai CN41 - Manual (Page 62)

Page
62
APPENDICES
7
7. APPENDICES
CONNECTING TO OTHER DEVICES
1 MIDI JACKS
These jacks are used to connect external MIDI devices with the CN41 piano. There are three terminals: MIDI IN,
MIDI OUT and MIDI THRU.
2 USB to Host
This jack is used to connect with a personal computer and exchange MIDI data.
3 USB to Device
This jack is used to connect with a USB device. (USB memory or USB fl oppy disk drive)
4 PEDAL JACK
This jack is used to connect the pedal cord from the pedal board to the CN41 piano.
5 LINE OUT JACKS
These jacks provide stereo output of the CN41 piano’s sound to amplifi ers, tape recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these jacks. The CN41 piano’s sound is mixed
with the LINE IN signals.
The CN41 piano’s VOLUME slider controls the output level of its own sound without affecting the level of the LINE
IN signal.
6 LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments
to the CN41 piano’s speakers. The audio signal coming through these jacks bypasses the CN41 piano’s volume
control. To adjust the volume level, use the output control of the external device.
Caution
y Do not directly connect the LINE IN and LINE OUT jacks of the CN41 together with a cable.
An audio loop (oscillation sound) will occur, resulting in damage to the unit.
1 2 3 4 6 5
Amplifi ers, Speakers, or similar
equipment
Audio equipment or
electronic instruments
External MIDI devices
Pedal cable
Computer and exchange
MIDI data. USB device
(USB memory or
USB fl oppy disk
drive)