Kenwood DDX6019 - Manual (Page 32)

32 | English
Direct Search
Tunes in a station when its frequency is entered.
1
Select a band
2
Select the Direct Search mode
3
Enter frequency
—
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
• The operation ends automatically if you do not operate
within 10 seconds.
Traffic Information
When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
T U N E R 13:50
T I
Traffic Information
3
2
1
1 Calls the Sound Effects Menu. (page 76)
2 Calls the Setup Menu. (page 56)
3 Turns the Traffic Information function on or off.
• It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.