Kyocera Lingo M1000 - Manual (Page 22)

14 Volume control
3 C
ALL FEATURES
This chapter describes call features such as
volume, holding calls, speed dialing and
other features.
Volume control
You have several ways to control the volume of
your phone.
Adjust volume during a call
To adjust the earpiece volume during a call, press
the
Volume key up or down.
Use the speakerphone
Your phone has a built-in speakerphone. To
turn on the speakerphone, press the
Speakerphone key.
The speakerphone icon appears on the home
screen when the speakerphone is on.
To turn off the speakerphone, press the
Speakerphone key.
Note: If you press the Speakerphone key during
an incoming call, you answer the call.
Silence an incoming call
To silence the phone without answering the call,
press the
End key or select Silence .
To silence the phone and answer the call, press
the
End key and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.
Hold Calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them. See “Hold Call” on page 59.
Speed dial
Use the speed dial feature to assign a one- or two-
digit shortcut to a contact. Before you can use
speed dialing, you must save a phone number as a
contact and assign a speed dial location to it. See
“Contact number” on page 30.
To call a contact that has a speed dial location:
1.
Enter the one- or two-digit speed
dial location.
2. Press the Send key.
1-Touch Dialing
The 1-touch dialing feature is the fastest way to
speed dial a contact that has a speed dial location.
See “1-Touch Dialing” on page 60.
82-G1934-1EN.book Page 14 Sunday, October 14, 2007 6:19 PM