Kodak P820 - Manual (Page 27)

Doing more
www.kodak.com/go/support 21
Setting the clock and timer
Manually setting the clock
1 Tap (Home), then (Settings).
2 Highlight Clock and timer, then tap OK.
3 Highlight Set time, then tap OK.
4 Slide to set the hour. Tap the right arrow to highlight the next setting (minutes),
then slide to adjust it.
5 Tap OK or Save to accept your changes.
Setting automatic on/off
Set your frame to turn on and off at a specified time every day.
NOTE: Set the clock before enabling auto on/off.
1 Tap (Home), then (Settings).
2 Highlight Clock and timer, then tap OK.
3 Highlight On/Off schedule, then tap OK.
The current time is displayed and the hour field is highlighted.
4 Set the Turn on time. Slide to adjust the hour. Tap the right arrow to highlight the
next setting (minutes), then slide to adjust it. Repeat to set Turn off time.
NOTE: Make sure the on time is earlier than the off time.
5 Tap Enable, then OK or Save when you’re done.
Your frame will now automatically turn on and off at the times you specified.
If your frame loses power, the clock time returns to the factory setting and the
automatic on/off times, if set, are disabled. To reset the clock and re-enable your
on/off times, see
Resetting the clock after losing power, page 27 .