Changing your frame orientation, Mounting your frame on the wall, 3 (see – Kodak P820 User Manual
Page 13
Getting started
www.kodak.com/go/support
7
Changing your frame orientation
Your frame is set up to display pictures in landscape
orientation. You can turn the
stand to change it to portrait
but you must also change the setting.
Change the stand position:
■
Remove the stand, turn it 90
°
, and replace as shown (see
).
Change the setting:
1 Tap
(Home)
→
(Settings).
2 Slide to highlight (Viewing options), then tap OK.
3 Slide to highlight Frame orientation, then tap OK.
4 Slide to highlight Portrait, then tap OK.
5 Tap
to exit.
Mounting your frame on the wall
Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your
frame securely to your wall.
To change to portrait
, turn
your frame 90° and use the
wall mounting holes at the top.
Wall mounting holes
(on back of frame)
Secure power cable
with attached clip