Konica Minolta DiMAGE X31 - Manual (Page 102)

102 D ATA - TRANSFER MODE
Batch print
Batch print in section 1 of the menu selects all still images on the memory card for printing. Batch
print cannot be made if the number of still images on the card exceeds 50. Use the PictBridge
screen (p. 99). When the all-frames option is selected, a screen opens so the number of copies of
each image can be specified. Up to twenty copies can be printed. The reset option cancels all
changes made to the print selection screen.
Index print
An index print of all still images on the memory card can be made. The quality and size of the print
can be specified with the camera menu. The number of images per page varies with the printer. The
print-setup confirmation screen is displayed before the print routine starts. Index print can be
selected in section 1 of the menu.
Paper size
The paper size of the print can be specified in section 2 of the menu. The printer-setup option uses
the size set with the printer. The sizes option should be set first, see below.
Sizes
To set paper sizes depending on region. This changes the paper-size option to common sizes used
in particular areas. The sizes option is in section 2 of the menu.
Print quality
The print quality can be set in section 2 of the menu. The printer-setup option uses the quality set
with the printer. The fine quality can be specified with the camera.
Data print
Data printed with the image can be specified in section 2 of the menu. The printer-setup option
uses the options set with the printer. The date of capture and the file name can be selected for
printing. Data printing can also be disabled with the menu.
Layout
The layout of the print can be set in section 2 of the menu. The printer-setup option uses the layout
parameters of the printer. Borderless printing can be specified with the camera as well as the num-
ber of images per page.