Kompernass KH 4083 - Manual (Page 16)

Troubleshooting
The display is blank
Check the batteries. Insert the batteries with their correct polarity or
exchange them for new ones.
Watering does not start at the programmed time
•
Control the programming and, if necessary, make adjustments to it.
• Check the batteries. Insert the batteries with their correct polarity
or exchange them for new ones.
• The water tap is not open. Open the water tap.
If the watering computer still does not function correctly, please contact
the manufacturer.
Cleaning
• Clean the watering computer with a soft cloth moistened with
water and mild detergent.
• At regular intervals clean the sieve in the coupling nut.
➩ Remove the water hose from the watering computer.
➩ Unscrew the watering computer from the water tap.
➩ Remove the cone-shaped sieve from the water inlet in the
coupling nut.
- 14 -
IB_KH4083_BL1562_EN_LB3+6 02.11.2007 11:04 Uhr Seite 14