Kyocera Deco E1000 - Manual (Page 70)

62 Voice dial list
14 V
OICE
C
OMMANDS
With voice features, you can call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list using
voice recognition.
Note: You cannot use voice recognition to end
a call; you must press the
End key when the flip
is open.
Voice dial list
To call or find a contact using voice dial you
must add the contact to your voice dial list. The
contact name must not have more than three
words or components in a contact name for
voice dialing recognition.
Add a voice tag
You can add a voice dial tag to your phone. See
“Add voice dial” on page 46.
Edit a voice tag
To edit existing voice dial tags:
1.
Select Menu > Contacts > Voice Dial List .
2. Select your desired contact.
3. Highlight the number with a voice tag and
select
Options > Add Voice Dial ,
Edit Voice Dial , or Erase Voice Dial .
4. Follow the prompts.
Voice commands
With voice commands, you speak your commands
into the phone’s microphone.
Start voice commands
1. Press the Call key to initiate voice
commands. The phone prompts, “Say a
name or say dial”.
2. Say one of the following commands and
follow the voice prompts.
– “
Say a name ” a call a contact on your
voice dial list.
– “ Dial ” to speak the digits of the phone
number.
3. Press the Call key again to exit and go to the
Recent calls list.
Call a contact
Before calling a person, you need to add the
contact name to the Voice Dial List. See “Add
voice dial” on page 46.
1.
From the home screen, press the Call key.
The phone prompts, “Say a name”.
2. Say the name of the person you want to call.
If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say “No” to cancel.
82-G1877-1EN.book Page 62 Thursday, August 23, 2007 10:53 AM