KORG R3 - Manual (Page 80)

74
Saving Data
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Saving a program
Settings that will be saved
• 01. Voice – 33. Arpeggiator-B page pa-
rameters, 34. Carrier – 39. Lvl/Pan page
parameters
• [TEMPO] knob setting
• ARPEGGIATOR [ON/OFF] switch set-
ting
• OCTAVE [UP] [DOWN] button setting
• Shift function “Program name”setting
• Shift function “Knob assign” setting
Procedure
1 Press the [WRITE] button.
Make sure that the main display in-
dicates “Program” (the type of data
to be saved), and press the [WRITE]
button once again.
If the main display indicates “Global”
when you press the [WRITE] button ,
the global parameters are what will be
saved. Use the [PAGE] dial to select
“Program“ and press the [WRITE]
button .
Saving your edited settings
If you have edited a program, your edited settings will be lost if you turn the power off or select another program
before saving (writing). In order to preserve your edits, you must save (write) the edited program. Changes you
make to the 40. Global-A – 46. Pedal/Sw page, or SHIFT functions (described later in this manual) will also be lost if
you turn off the power before saving (writing). In order to retain the modified settings, you must save (write) them.
Never turn off the power while data is being written. Doing so may destroy the data.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Saving GLOBAL, MIDI settings
Settings that will be saved
• 40. Global-A – 46. Pedal/Sw page pa-
rameters
• Shift function “PROTECT”setting
• Shift function “CALIBRATION” setting
• Formant motion data
Procedure
1 Press the [WRITE] button.
The main display will indicate Pro-
gram (the type of data to be saved),
so use the [PAGE] dial to select Glo-
bal and then press the [WRITE] but-
ton once again.
2 Press the [WRITE] button once
again to save (write) the global data
and MIDI settings.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to the Play
mode.
If you press the [WRITE] button when
one of the Edit mode 40. MIDI – 46.
Pedal/Sw pages are selected, it will be
the global data that is saved.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Saving Formant Motion data
Settings that will be saved
• Formant motion data
Procedure
1 Press the [WRITE] button.
The main display will indicate Pro-
gram (the type of data to be saved),
so use the [PAGE] dial to select
Formant and then press the [WRITE]
button once again.
2 Use the [PAGE] dial to select the des-
tination formant motion data num-
ber into which you want to save the
formant motion data.
3 Press the [WRITE] button once
again to save (write) the program.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to Play
mode.
If you press the [WRITE] button im-
mediately after recording a formant
motion, the main display will show
formant motion data as the object to
be saved.
If the main display indicates “WrtPrtct”
when you press the [WRITE] button
again, write protect is turned on (i.e.,
you can't write programs). Press the
[EXIT] button twice to cancel the Write
operation, and turn off Write Protect
(
☞p.78).
2 Use the [PAGE] dial to select the des-
tination program number into which
you want to save the program.
3 Press the [WRITE] button once
again to save (write) the program.
The main display will indicate “Com-
plete.” The Write operation is com-
pleted, and you’ll return to Play mode.