Kodak EasyShare C530 - Manual (Page 47)

Troubleshooting
www.kodak.com/go/support 41
Camera/computer communications
LCD screen messages
If... Try one or more of the following
The computer does
not communicate
with the camera. ■ Visit www.kodak.com/go/camerasupport .
■ Turn on the camera ( page 2 ).
■ Install new batteries ( page 1 ) or charge rechargeable batteries.
■ See the Power Management section of the laptop user’s guide to
disable this feature.
■ Connect cable to camera and computer port ( page 15 ).
■ Install the software ( page 14 ).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (
page 14 ).
■ Disconnect camera from the computer. Close all software applications,
reconnect camera.
■ Close that software before starting the Kodak software.
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.) ■ Disconnect USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (
page 14 ).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (
page 14 ).
If... Try one or more of the following
No images to
display ■ Change image storage location setting ( page 26 ).