Using the lcd screen as a viewfinder, Using digital zoom – Kodak EasyShare C530 User Manual

Page 13

Advertising
background image

Taking pictures and videos

www.kodak.com/go/support

7

Using the LCD screen as a viewfinder

IMPORTANT: The Liveview feature depletes battery power; use it sparingly.

1 Turn the Mode dial to

.

2 Press the OK button to turn on the LCD screen.

3 Frame your subject in the LCD screen.

4 Press the Shutter button to take the picture.

5 To turn off the LCD screen, press the OK button.

To make the LCD screen turn on whenever the camera is on, see

Liveview, page 28

.

Using digital zoom

Use digital zoom in Auto mode to get up to 5X closer to your subject.

IMPORTANT: You may notice a decrease in printed image quality when using digital

zoom. The blue slider on the zoom indicator pauses and turns red when the
picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm)
print.

1 Press the OK button to turn on the LCD screen, then

press .
The LCD screen displays the zoomed image and the
zoom indicator.

2 Press

to zoom in and out.

3 Press the Shutter button to take the picture.

To turn off digital zoom, from the lowest setting,
press .

NOTE: You cannot use digital zoom for video recording.

Digital zoom is available only when Liveview is turned on (see

page 28

).

OK button

Zoom indicator

Advertising
This manual is related to the following products: