Kyocera KR1 - Manual (Page 19)

Using the Configuration Menu 15
Advanced > Virtual Server
The Kyocera KR1 Mobile Router can be configured as a virtual server so that remote users accessing Web or FTP services via the
public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
The Kyocera KR1 Mobile Router firewall feature filters out unsolicited packets to protect your LAN network so all computers
networked with the Kyocera KR1 Mobile Router are invisible to the outside world. If you wish, you can make some of the LAN
computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the Kyocera KR1 Mobile
Router redirects the external service request to the appropriate server within the LAN network.
The Kyocera KR1 Mobile Router is also capable of port-redirection, meaning incoming traffic to a particular port may be
redirected to a different port on the server computer.
Each virtual service created is listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services
already in the table. You may use them by enabling them and assigning the server IP to use
that particular virtual service.
Virtual Server- Select Enabled or Disabled. The default setting is Disabled.
Name- Enter the name referencing the virtual service.
Private IP- The server computer in the LAN (Local Area Network) that provides the virtual services.
Protocol Type- The protocol used for the virtual service.
Private Port- The port number of the service used by the Private IP computer.
Public Port- The port number on the WAN (Wide Area Network) side that is used to access the virtual service.
Schedule- The schedule of time when the virtual service gets enabled. The schedule may be set to Always, which
allows the particular service to always be enabled. If it is set to Time, select the time frame for the service
to be enabled. If the system time is outside of the scheduled time, the service is disabled.