Assembly instructions, For your safety – Kettler DVP721VR/00 User Manual

Page 5

Advertising
background image

5

Assembly Instructions

USA

GB

KETTLER´s child’s seat was designed incompliance with applicable safety regulations and manufactured under per-
manent quality control. The knowledge gained in this process is used to constantly improve and develope our pro-
ducts. In order to offer our customers the very best in quality, we reserve the right to make technical changes at
any time. Should you have the need of assistance, please conntact your dealer.

For Your Safety

Only use this bicycle child's seat for its intended purpose, i.e. only mount it above the bike's rear axle by me-
ans of the included mounting parts and only use it for the transport of children.

The seat is suitable for children who can already sit alone (about 9 months), and may be loaded with a maxi-
mum weight of 22 kg including luggage. (Check regularly with the age of the child).

This child's bicycle seat is not suitable for fully sprung bicycles.

The child seat is suitable for bicycles with a minimum wheel diameter of 28 INS and a frame height from 53cm.
Lower wheel diameters and frame heights must be checked in individual cases.
Furthermore the child seat can be used with a frame tube diameter of 28, 30, 32, 35 and 40 mm.

Any other use is inadmissible and may even be dangerous. The manufacturer cannot be held liable for dama-
ge caused by unauthorized use.

The bicycle used must be safe and correspond to the Road Traffic Licensing Regulations valid in your country.
Please make enquiries if there are regulations concerning the transport of children.

If you have a special bicycle structure please ask your dealer if your bike is suitable for the use of a child's seat.

The bicycle must be suited for accepting such additional loads. Furthermore, the admissible total weight of the
bicycle including child and child's seat must not be exceeded. If necessary, ask your bicycle manufacturer or
supplier regarding the bicycle's carrying capacity.

If you transport your bicycle on a luggage rail on your car, you should dismount the child's seat from your bicy-
cle to avoid exceeding the carrying capacity of the luggage rail.

When attaching the seat to a bicycle that has a saddle stem with suspension please take into account the di-
stance between the seat and the suspension spring. You should ensure that the child’s fingers cannot reach the
spring thus avoiding the danger of injury.

Please note that the riding behaviour of the bicycle changes when the child’s seat is used (irrespective of child
being transported or not). Owing to the higher centre of gravity the bicycle's behaviour may change unfavou-
rably and the bicycle's dirigibility may be impaired. For this reason, ride carefully – in particular with regard to
braking and evading manoeuvres. Also avoid riding with one hand only.

Pay attention that the child does not handle any objects (e.g. toys) which might get caught in the wheels. Clo-
thes or extremities of the child should never be able to get caught in turning parts or in the brake and transmis-
sion system.
This should be checked regularly as the child grows older.

Protect your child from sharp edges of your bicycle, from worn cables and other parts that might lead to inju-
ries.

Before going on a ride, and during breaks, you should check that the seat is firmly attached, and also check all
components for potential damage and loose connections (screws, connections, safety belts etc.).

Attention: Only transport the child with the safety belt correctly and firmly fastened and the foot straps closed.
Have a check during breaks that those safety devices are still in place.

Even if no child is carried, close the seat belt to avoid it getting caught in turning parts or catching on items that
are passed during the ride.

Pay attention to suitable and sufficiently warm clothing of your child. Children who are sitting still normally cool
down faster than the rider.

We recommend that adult and child wear suitable helmets.

Adjust the headrest so that its upper edge matches the child's ear level.

Please read these instructions carefully before the assembly and first use. You will get important information on
your safety as well as the use and maintenance of the child’s seat. Retain these instructions for information and
for maintenance works as well as orders for spare parts.

Advertising