Kenwood DV-4070 - Manual (Page 16)

Settings
16
Chapter 2: Various Setups
When "MAIN" is selected in "SET UP
MENU":
The setups according to the connected TV, viewing
restriction, DVD VIDEO mode, OSD position, on-
screen messages and IPB display can be set.
OSD Position 7 Normal
On Screen Message 7 On
IPB Display 7 Off
MAIN
EXIT MENU
7 Level 8
TV Aspect
TV Mode
TV Monitor Type
7 4:3
7 Letterbox
7 Standard
7 Off DVD VIDEO Mode
Rating
"Rating" Setting *
¶ Sets the viewing restriction of DVD VIDEO. (This
functions only with DVD VIDEO discs
compatible with viewing restriction.)
"TV Aspect" Setting )
¶ Sets the picture aspect ratio according to that of
the connected TV.
"TV Mode" Setting )
¶ This setting is required when the aspect ratio of
the connected TV is 4:3.
"TV Monitor Type" Setting ¡
¶ Set this item according to the format of the
connected TV or video monitor.
"DVD VIDEO Mode" Setting ™
¶ Sets the play mode of DVD discs.
"OSD Position" Setting ™
¶ Sets the position of the OSD (On-Screen
Display).
"On Screen Message" Setting £
¶ Switches the on-screen message on/off.
"IPB Display" Setting ¢
¶ Switches the IPB display on/off.
When "SOUND" is selected in "SET UP
MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector
of the player.
When the system is connected using the 6CH.
OUTPUT jacks of the player, also select "SOUND" to
set the speakers, audio output during DVD or VCD
search, dynamic range control function and audio
filters.
EXIT MENU
Digital Audio
Dolby Digital
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7 On
7 Bitstream
7 Bitstream
7 Bitstream
7 On
7 Wide
7 Filter 60kHz