Connecting wires to terminals – Kenwood KDC-122S User Manual
Page 17
— 17 —
P.CONT
ANT.
CONT.
FRONT • L
FRONT • R
REAR • L
REAR • R
–
+
REAR
L
R
FM/AM antenna input
1
Rear left output (White)
23
Rear right output (Red)
28
Fuse (10A)
24
2
KENWOOD disc changer control input (KDC-2022/2022V/202MR only)
Wiring harness
(Accessory1)
25
29
White/Black
32
Gray/Black
35
Green/Black
38
Purple/Black
White
31
Gray
34
Green
37
Purple
40
To front left
speaker
30
To front right
speaker
33
To rear right
speaker
39
To rear left
speaker
36
Ignition wire (Red)
20
Battery wire (Yellow)
21
Ground wire (Black)
· (To car chassis)
22
Ignition key
switch
10
Car fuse box
(Main fuse)
11
ACC
13
Car fuse
box
14
Battery
12
If no connections are made, do not let the wire come out from the tab.
4
Front left output (White) (KDC-2022/2022V/202MR only)
26
Front right output (Red) (KDC-2022/2022V/202MR only)
27
To connect the Disc changer, consult
your Disc changer manual.
3
Connecting Wires to Terminals
Power control/Motor antenna
control wire (Blue/White)
16
6
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
Not Used
19
Do not let the wire come
out from the tab.
4b
KDC-2022/122_U.S 02.9.26 3:20 PM Page 17