Konica Minolta IP-411 - Manual (Page 128)

3-98 Printer Drivers
Printer Driver Screens
PCL Driver Screens for Windows 95 Back Covers
Back Cover Tray
The Back Cover Tray is set at None by default. To change this setting:
1 Click the arrow next to the Back Cover Tray field to view tray options.
2 Highlight the tray you want to use for the Back Covers, then click OK. In this example, Tray 2 is selected.
If you are using colored or preprinted paper for the Back Covers, be sure to load the paper in the tray
selected, otherwise the paper currently loaded will be used.
To leave the Back Cover Tray setting unchanged, click Cancel.