Kenwood HM-333 User Manual
Page 32
32
Various CD playback features
Application section
To add a track to an existing program
1
Select the track number to be added with
the numeric keys.
2
Press the SET key.
÷ Up to 32 tracks can be programmed. When "PGM FULL"
is displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
To clear a programmed track
To clear the entire program
÷ Each time the key is pressed, the last track in the pro-
gram is cleared.
Goes off
Press the numeric keys as shown below....
To select track No. 23
: +10
X
2, 3
To select track No. 40
: +10
X
4, 0
The program mode is cancelled when the unit is turned off or the programmed disc is ejected. The set program
is cleared entirely at this time.
C D
P-5 has been deleted
P - 0 5
C L E A R
CLEAR
PGM
5
2
8
0
6
3
9
4
1
7
10
SET
Note
Note
Note
Press in stop mode
Press in stop mode
Press in stop mode