Kompernass PFLK15 User Manual
Page 5
RANGE OF USE
The PARKSIDE soldering pencil PFLK 15, with its nominal 15 watt power rating, is ideal for soldering electronic components
and circuit boards.
The nominal soldering tip temperature is about 320° C. For best results use electronics solder 1.0 (10 g included with the soldering pencil) or
1.5 mm dia. 60 % Sn. We recommend soldering paste (not soldering grease or soldering fluid) as a flux.
The design of the soldering pencil makes it especially suitable for use where access is difficult or for fine soldering work. The interchangeable
tips increase the versatility of the soldering pencil.
SAFE OPERATION
0
1. Check the mains voltage. Please make sure that the available mains voltage corresponds to that shown on the rating plate
on the equipment.
0
2. Switch equipment on before placing into contact with workpiece. Always turn on the equipment before placing it into contact
with the workpiece.
0
3. Keep your working area tidy. Untidiness at your working area may lead to accidents.
0
4. Take surrounding influences into consideration. Do not subject power tools to rain. Do not use power tools in a moist or wet
environment. Ensure good lighting. Do not use power tools close to inflammable liquids or gases.
0
5. Protect yourself against an electric shock. Avoid physical contact with earthed parts such as tubes, radiators, stoves, refrigerators.
0
6. Keep out of reach of children. Do not let others tough the tool or the cable. Keep other people away from your working area.
0
7. Store your tools in a safe place. Tools not being used should be stored in a dry, high and closed place, out of the reach of children.
0
8. Do not overload your power tools. Your work is safer and better if carried out within the indicated capacity ranges.
0
9. Use the correct power tool. Do not use machines of insufficient capacity for heavy-duty work. Do not use tools for other purposes than
those for which they are intended, for example do not use a manual circular saw for cutting tree trunks and timber.
10. Wear appropriate workwear. Do not wear wide clothes or jewellery since they might be caught by mobile parts. When working in the
open, rubber gloves and non-skid footwear is recommended. Wear a hair net if you have long hair.
5