Kenwood Excelon DDX812 - Manual (Page 96)

96 DNX8120/DDX812/DDX8032BT
Surround Control Adjustment
You can adjust the sound field.
1 Display the Surround Control screen
2 Adjust the sound field
2
3
1
4
2
1
1 Sets the surround position by adjusting the
front and rear volume balance.
2 Sets the vocal image position by adjusting
the right and left vocal volume level.
3 Turns the Panorama mode On or Off.
4 Returns to Surround Control screen.
⁄
• You cannot use the <Surround Control Adjustment>
during playback of a Multi-channel source.
• You cannot use the <Surround Control Adjustment>
when the sound field of "Dolby PLII Movie", or "Dolby PLII
Matrix" has been set.
Position
You can adjust the sound effects according to
your listening position.
1 Display the Position screen
Touch in the "Audio
Control Menu" screen (page 92.
1
4
2
3
1 Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front),
and "All" (All) positions.
2 Displays the Position Fine Control screen.
(page 97)
3 Stores the present adjustment setup in
memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch
to more
than 2 seconds.
To call your adjustment from memory:
Touch
to of your adjustment
you wish to call from memory.
4 Returns to the "Audio Control Menu" screen.
⁄
• The final distance is adjusted to the total of Car Type Set
Up value (page 64) and Position Setup (both Position and
Position Fine Control) value.
• If you change the Car Type Set Up value (page 64), the
position is set to "All".
• Only the adjusted distance of position setup (Position
and Position Fine Control values) is stored in memory.
Therefore, the final adjustment distance changes if you
change the Car Type Set Up value (page 64).
Audio Control