Konica Minolta DiMAGE E203 - Manual (Page 44)

44
PC MODE
CONNECTING TO WINDOWS 98 AND 98SE
Choose the recommended search for a suitable
driver. Click “Next.”
Choose to search for the driver in the CD-
ROM drive. Click “Next.”
The driver needs only to be installed once. During installation, if the operating system requests the
Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on
the screen. To install the Windows 98 driver, follow the instructions in the connecting-the-camera-to-a-
computer section on page 43.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE E203 CD-ROM in the
CD-ROM drive. Click “Next.”
The add new hardware wizard will confirm the
location of the driver. Click “Next” to install the dri-
ver in the system.
• The letter designating the CD-ROM drive will
vary between computers.
The last window will confirm the driver has been
installed. Click “Finish” to close the add new
hardware wizard.