Konica Minolta bizhub 180 - Manual (Page 202)

7.6 Specifying Copy Settings 7
bizhub 180 7-45
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
To specify the binding width (“MARGIN SETTING” function)
1 Select the “COPY SETTING 1” menu.
❍ Refer to “ To select the “ COPY
SETTING 1 ” menu ” on page 7-39 .
2 Press the [6] key from the 10-Key Pad
to select “MARGIN SETTING”.
3 Using the 10-Key Pad, enter the
binding width (margin), and then press
the [Yes] key.
❍ The binding width can be set
between 0 inch (0 mm) and 13/16
inch (20 mm).
❍ If you wish to correct the setting, press the [No/C] key, and then enter the
new number.
The “COPY SETTING 1” menu appears again.