Kenwood KRF-V5090D - Manual (Page 13)

13 EN
ENGLISH
CENTER FRONT
+
-
R L
RED WHITE GREEN
KRF-V5090D
SURROUND
+
-
R
GRAY
L
BLUE
SURROUND
BACK
SURROUND
+
-
KRF-V6090D
R
GRAY
L
BLUE BROWN
SPEAKERS (6
SPEAKERS (6-16Ω) SPEAKERS (6-16Ω)
SUB WOOFER
PRE OUT
PRE OUT
SURR BACK L *
SURR BACK R
PRE OUT
SURR BACK L
/SURR BACK
SURR BACK R
KRF-V6090D
* KRF-V6090D:
SURR BACK L
/SURR BACK
Setting up the system
Connecting the speakers
Center
Speaker
Front Speakers
Right Left
Surround
Back Speaker
Powered
Subwoofer
Right Left
Surround Speakers
Right Left
To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to “ 4 Adjust the speaker volume level.”. ^
Power Amplifier
Surround Back Speakers
When connecting a Surround
Back speaker to this terminal,
select “SPEAKER” at speaker
settings.
^
Power Amplifier
Surround Back Speaker
When connecting a single
Surround Back speaker
through a power amplifier
to PRE OUT jack, connect
it as above and select
“SPEAKER” at speaker
settings.
^
KRF-V6090D only
When using both
Surround Back Left
and Right speakers,
select “PRE OUT”
at speaker settings.
^
04.11.25, 20:22 13