Krell Industries MASTER REFERENCE SUBWOOFER - Manual (Page 30)

(Inputs continued)
19 LFE Single-ended Input
The Master Reference Subwoofer is equipped with a low frequency effect ( LFE )
single-ended input. This input is connected to a surround preamp/processor, for
use with Dolby 5.1 and DTS encoded software.
Outputs
20 Left and Right CAST High-pass Outputs
The Master Reference Subwoofer is equipped with left and right CAST high-pass
outputs, for connection to the CAST inputs of a Full Power Balanced Amplifier
or Master Reference Amplifier.
21 Left and Right Balanced High-pass Outputs
The Master Reference Subwoofer is equipped with left and right balanced high-pass
outputs, for connection to the balanced inputs of an amplifier.
22 Left and Right Single-ended High-pass Outputs
The Master Reference Subwoofer is equipped with left and right single-ended
high-pass outputs, for connection to the single-ended inputs of an amplifier.
23 Left and Right CAST By-pass Outputs
The Master Reference Subwoofer is equipped with left and right CAST by-pass
outputs, for connection to the CAST inputs of another Master Reference Subwoofer.
24 Left and Right Balanced By-pass Outputs
The Master Reference Subwoofer is equipped with left and right balanced
by-pass outputs, for connection to the balanced inputs of another Master Reference
Subwoofer.
25 Left and Right Single-ended By-pass Outputs
The Master Reference Subwoofer is equipped with left and right single-ended
by-pass outputs, for connection to the single-ended inputs of another Master
Reference Subwoofer.
Note
You can connect to any input (CAST, balanced, or single-ended) and output at any high-pass
output. All high-pass outputs are active at once. For example, a signal from a source con-
nected to the Master Reference Subwoofer through a CAST input can be output as CAST,
balanced, and single-ended.
While you can connect at any input, you can output only at one by-pass output. By-pass
outputs are active only one-at-a-time. For example, the CAST input is available only at the
CAST by-pass output. The balanced input is available only at the balanced by-pass output.
The single-ended input is available only at the single-ended by-pass output.
(SECTION THREE: Features continued)
24