Kobe Range Hoods IN2636SQB - Manual (Page 13)

11
The six control buttons for the wireless remote control are Power Control (On/Off), Light Control, Speed
Controls (High, Medium, Low & QuietMode™), Timer Control and Auto Control. Refer to Figure 12
.
Fig. 12
Power Control
Press Power Control to turn On/Off the hood.
Light Control
(Lights are control separately from ON/OFF control. Turning power off will not turn lights off.)
Press Light control to turn lights ON.
(Each press of Light Control will cycle the light intensity through high, low, and off.)
Speed Control
Press the Speed control to activate the Fan. The KOBE hood will start on High speed. Each
press of the Speed Control button will cycle through the various speeds.
Press to cycle from High, Medium, Low, and QuietMode™.
Press to cycle from High, QuietMode™, Low, and Medium.
Timer Control
Press Timer Control to activate Timer mode. The Timer Indicator on the display will flash.
If Speed/Timer Control button ( OR ) is not pressed within 6 seconds,
the unit will automatic exit the Timer mode. The arrow will switch to speed function
control.
During the Timer mode, each press of will decrease the timer by 1 minute.
While each press of will increase the timer by 1 minute.
Once the timer is set, after 6 seconds, the Timer Indicator will stop flashing and fans will
automatically shut off after set time.
Auto Control
Press Auto Control to activate the Integrated Sensor Control (ISC) feature.