Kustom 12 Gauge - Manual (Page 5)

Back Panel
Speaker Output - This jack is used to deliver the amplified signal to an external speakers.
Total minimum load is 8 ohms. Do not use a load lower than 8 ohms. Damage to the amplifier
may result. The amplifier ’s internal speaker is disconnected when this jack is used.
Line Output - this is a 2-conductor 1/4” line output jack. This will allow an external amplifier
or mixing board to be supplied with the signal from this amp.
Headphone Output - this is a 3-conductor stereo jack. The amplifier’s internal speaker is
disconnected when this jack is used.
CD/TAPE Input - this is a 3-conductor 1/4” jack that allows playback from a Compact Disc or
Tape player.
MODEL 12 Gauge™(J) 16 Watt
AC 120V 30W 60Hz
KUSTOM MUSICAL AMPLIFICATION INC
CINCINNATI, OHIO USA
SERIAL NUMBER
DESIGNED IN USA MADE IN CHINA
0536
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
ATTENTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LINEOUT SPEAKER CD/TAPE
INPUT
HEADPHONE
FUSE:T315mA L 250V
LEAD GUITAR AMPLIFIER W/EFFECTS
5
2001124
CONFORMS TO
UL STD. 60065
CERTIFIED TO
CAN/CSA STD.
C22.2 NO.60065:03