Appendix a pin assignments, Utp port pin assignments – Kingston Technology KNS1600R User Manual
Page 15
10
Appendix A Pin Assignments
Kingston Technology Company
KNS1600/R User’s Guide - Rev. B00
Appendix A Pin Assignments
UTP Port Pin Assignments
The UTP ports use RJ-45 Unshielded Twisted Pair (UTP) cabling. Connector
pin numbers and pin wiring assignments are listed below in Figure A-1 and
Table A-1, respectively. Twisted-Pair cables can be wired with either straight-
through or crossover pin assignments. Both wiring schemes are mentioned in
"Appendix B Cabling Guidelines" for reference in creating a twisted-pair cable.
1 2 3 4 5 6 7 8
U T P P o r t
The UTP port labeled MDI is a standard straight-through
UTP port. All other UTP ports are configured as MDI-X,
or internally crossed. By default, all repeating and switched
UTP ports are generally configured as MDI-X, unless otherwise
specified. See page 7 Notes on MDI and MDI-X for details.
M D I
Fig. A-1 RJ-45 Connector Pin Numbers
Pin Number
MDI-X
MDI
1
Receive Data +
Transmit Data +
2
Receive Data -
Transmit Data -
3
Transmit Data +
Receive Data +
4,5
Not Used
Not Used
6
Transmit Data -
Receive Data -
7,8
Not Used
Not Used
Table A-1 UTP Pin Assignments