Kohler Single-Control Bath and Shower Trim KT6908 - Manual (Page 2)

Tools and Materials
Before You Begin
CAUTION: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. When using
this valve and trim in a fiberglass or acrylic installation, use
the 88526 Thin Wall Installation Kit.
Observe all local plumbing and building codes.
The finished wall or bath/shower unit must be installed prior to
installing this trim.
Before installing the trim, determine if the maximum water
temperature is acceptable to the user. If temperature adjustment is
needed, refer to the
″Optional Temperature Limiting Adjustment″
section of this guide.
The valve shuts off by water pressure. Do not force the handle in
any direction. To turn the valve off, gently turn it to the
″OFF″
position.
Strap
Wrench
Thermometer
Thread
Sealant
Assorted
Screwdrivers Plumbers
Putty Hex
Wrench
114487-2-CC 2 Kohler Co.