Kalorik USK SKV 3 - Manual (Page 6)

6 USK SKV 3 - 060104
Assembly of the accessories
• After the handle has been assembled to the body of the vacuum
cleaner and the power cord has been wrapped around the cord
holders, the attachments can be assembled.
• The crevice tool is situated in the extension tube. Before using the
appliance, always remove this crevice tool from the tube, even if
you do not use it. Otherwise, the crevice tool might block some
dust particles in the tube.
• To use the crevice tool and/or the small brush, mount them to the
extension tube as described below, and attach the tube to the
upper flexible hose.
• If you want to use the vacuum cleaner with the agitator function,
connect the tube to the lower and upper flexible hose.
Attachment Storage
• Place the tube into the tube holder.
• Loop the loose hose over the hose hook.
• Slide the crevice tool inside the extension tube when not in use.
• Place the small brush into the brush holder.
Transporting the vacuum cleaner
To move your vacuum cleaner from room to room, unplug the mains
cable and carry the vacuum cleaner using its carrying handle.
Small brush Crevice tool Tube