Kenwood KXF-W6010 - Manual (Page 15)

15
CT-2050/203/KXF-W6010/W4010 (En/M)
Convenient music search (DPSS)
Rewind & Play operation
Dash & Play operation
Single-tune repeated playback operation
Direction of tape direction indicator: 3.
Press simultaneously.
Press simultaneously.
The Dash & Play skips long non-recorded spaces automatically as the tape is played.
This operation cannot be performed with the remote control (of the separately sold amplifier).
÷ In case the REV.MODE key is set to “[” and tapes are inserted in both
of the decks, when a deck finishes Dash & Play, the other deck starts
Dash & Play for 16 times, after which it stops.
Each press switches the indication.
1 “ [” : Two sides are played only once, after which playback
stops.
2 “ ””: Two sides are repeated 8 times, after which playback
stops.
3 “ “”: One side is repeated 8 times, after which playback
stops.
When direction of tape direction indica-
tor is
3:
Press simultaneously.
÷ Press the stop (7) key to stop playback and cancel this operation.
÷ Normal playback resumes after repeating the same tune for 16 times.
÷ Press the stop (7) key to stop playback and cancel this operation.
¡ 1
2 3 7
¡ 1
2 3 7
Direction of tape direction indicator: 2.
÷ Tape returns to the beginning of the tape side being played and
playback restarts from there.
÷ Press the stop (7) key to stop playback and cancel this operation.
2 3 7
1
Play the tune to be repeated.
2
Press the play key of the same direction
as the current tape transport direction.
REV.MODE
¡ 1
1
Determine the playback mode (conditions).
2
Press the
1 and ¡ keys simultaneously.
This operation cannot be performed with the remote control (of the separately sold amplifier).