Kohler Purist/Purist with Mood Lighting K-1110-CT-0 - Manual (Page 10)

Page 10 Part No V089160-Issue B Apr 05 Kohler Co.
Remote
OK
Button
Mode
Button
-
+
+
1.5 V AAA
Alkaline battery
3.5
OPERATING THE REMOTE
CONTROL (OPTIONAL).
3.5.1. FUNCTIONS
The remote control can be used to control all
the whirlpool functions.
The whirlpool can be turned on and off using
the power button on the remote control.
The M (mode) key is used to scroll through the
available functions.
The icons on the dial control indicate the
functions as detailed on previous page.
Pressing O.K. or arrow up key on the remote
control will select a particular function.
Two 1.5V AAA alkaline batteries are supplied
fitted in the remote control. To replace, simply
unscrew the bottom end cap and insert the
batteries. Tighten the end cap securely making
sure that the end cap makes contact with the
seal.
3.5.2. PROGRAMMING
Programming your remote control is normally
not required. If more than one device in your
home, or in the near vicinity of your home,
uses a remote control, it may be necessary to
program this remote control to the user key
pad. If you replace your remote control, or
replace the controller, it may be necessary to
program the remote control.
Programming steps:
1. Turn power on to the whirlpool.
2. Turn off all modes of operation. Wait
approximately one minute until the dial control
key pad darkens completely.
3. On the Dial Control press the up arrow, down
arrow and the OK buttons simultaneously. The
-
Base
UP
DOWN
Power
3.0 OPERATION. Cond...