Samsung WIP-5000 - Manual (Page 70)

APPLICATION MENUS
Page 52 © SAMSUNG Electronics Co., Ltd.
Selecting the Bell Sound
This function enables you to select one bell sound out of a selection of 10 sounds.
1
. Press the [MENU] button and select the [4. Vol/Effect], then press the [OK] button.
2 . Press the [ ]/[ ] button and select the [2. Ring
Type], then press the [OK] button. This will result
following screen appearing.
3
. Press the [ ]/[ ] button and select a desired bell sound.
Press the [OK] button to save the bell sound.
[MENU] → [4] → [2] → Select a Bell Sound → [OK]
01 : Melody 1
02 : Melody 2
03 : Melody 3
Ring Type