Kompernass D-44867 User Manual
Page 7
- 5 -
Using the appliance safely:
• In the event of danger, immediately
remove the power plug from the wall
socket.
• Never use the appliance for purposes
other than those for which it was
designed.
• Remove the power plug from the wall
socket when the appliance is not in
use, when you remove parts and
before cleaning the appliance.
• Do not use the appliance outdoors.
Appliance description
q
Lid
w
Large squeezing cone
e
Small squeezing cone
r
Upper fruit pulp sieve
t
Fruit pulp regulator
y
Lower fruit pulp sieve
u
Juice collector
i
Drive axle
o
Power cable with power plug
a
Appliance plinth
s
Power cable storage
Set-up and assembly of the appliance
ƽ
Important: Ensure that the power
plug is not in the power socket before
assembling the appliance.
1. Unwind the power cable
o
completely
from the cable storage
s
and secure
it in the lateral recess on the appliance
plinth
a
.
2. Place the appliance plinth
a
on a level
and slip-free surface.
Note: Rinse all removable compo-
nents thoroughly before the first
usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector
u
on the drive
axle
i
of the appliance plinth
a
and
turn it clockwise as far as it will go.
4. Place both parts of the fruit pulp sieve
r
/
y
into each other so that the fruit
pulp regulator
t
protrudes through
the recess. Both parts must audibly
engage.
5. Place the assembled fruit pulp sieve
r
/
y
on the juice collector
u
. The fruit
pulp regulator
t
must lie on the grip
and catch in the rabbet on the grip.
6. Press the small squeezing cone
e
on
the drive axle
i
so that it engages.
Note: If you want to press oranges
or other larger fruits, place the large
squeezing cone
w
over the small
squeezing cone
e
. Ensure that the
lobes of the small squeezing cone
e
engage in the recesses of the large
squeezing cone
w
.
7. Insert the power plug into a wall
power socket. The appliance is now
ready for use.
IB_KH25_E6575_EN.qxd 02.08.2007 9:38 Uhr Seite 5