Kodak 4620 - Manual (Page 24)

25
PLAYBACK
General playback hints
This DVD player will play the following discs:
• DVD
• Video CD
• Super Video CD
• MPEG-4 or DivX
® discs
• DVD+RW (video mode / ISO 9660, finalised)
• DVD+R (video mode / ISO 9660, finalised)
• DVD-RW (video mode / ISO 9660, finalised)
• DVD-R (video mode / ISO 9660, finalised)
• DVD+R DL
• CD-R
• CD-RW
• Audio CD
• MP3
• Kodak Picture CD
You can operate the DVD player using the remote control or the buttons on the
front panel of the DVD player.
Playing a DVD
1. If playback does not start automatically, press the Play button “ A ”.
2. To stop the disc, press the Stop button “ J ” on the remote control or on the
front of the device.
3. To eject the disc, press the Open/Close button “
K
” on the remote control
or on the front of the device.
Problems:
“
” will be displayed on the screen:
Some discs can be manufactured so that certain steps are required before the
disc can be played, or so that only limited operation is possible during playback.
When an “
” appears on the screen, the selected feature is not possible.
The screen is showing the message “Wrong region”:
• Since DVD films are normally not released in all parts of the world at the same
time, all DVD players have a specific region code. Discs can be given an
optional region code. If the region codes differ between the player and the
disc, playback is not possible.
• You can find the region code on the back of the device.
• The region code does not apply to recordable DVD discs.
DVD menu:
When playing a DVD, a menu may appear. If the titles and chapters are num-
bered, press a number button on the remote control. You can also use the
direction buttons “
C ”, “ D ”, “ B ” and “ A ” to select a menu item and confirm
with the button “ENTER”.
You can also access the menu using the button “MENU” or “TITLE” on the
remote control.
ENG