Kompernass KH 2314 - Manual (Page 8)

- 6 -
Adjusting Time and Date.
The time and the date are transmitted automatically
by the radio stations. Should the DAB Radio not
receive any information, the time display starts at
00:00:
00 .
Operation
DAB-Mode
In DAB-Mode the radio receives digital radio trans-
missions. With the first switching on of the radio the
scan mode Station Search starts automatically.
Should a station already have been received,
the radio starts with the last tuned station.
Note:
Unlike an analog radio, with DAB several stations
(an Ensemble or Multiplex) are bundled together
to a station group and transmitted on one frequency.
When the radio has found a station group, the
name of the station and the station group are
shown in the display.
Station Search (Auto-Tune)
You can choose between two different station
search methods: Quick Scan and Full Scan.
Quick Scan searches only for the frequencies used
in most countries. This function can be used to search
for new stations and is quicker than the Full Scan
search.
Full Scan examines all frequencies in the DAB III Band.
When the station search is finished, the transmitter
found first is shown in the display.
• To activate the Quick Scan, first briefly press
the button AUTOTUNE . In the display appears Scan
Services Quick Scan. Thereafter, the search
advance is represented from 0 - 100% by a
progress bar. At the end of the search run the
number of transmitters found is briefly displayed
(X Services found).
• To activate Full Scan, hold the button AUTOTUNE
pressed down until Scan Services Full Scan is
shown in the display. Thereafter, the search advance
is represented from 0 - 100% by a progress bar. At
the end of the search run the number of transmitters
found is briefly displayed (X Services found).
Note:
If you wish to conclude the station search prematurely,
turn the multi adjustor
VOLUME/SELECT .
Accessing the station
1. To call up a found transmitter, press the button
JOG MODE/SELECT . In the display appears the
indicator <SELECT>.
2. Turn the multi adjustor VOLUME/SELECT to the left
or right to show the various stations, one after
the other.
3. When the sought after station name is indicated
in the display, press the button JOG MODE/SELECT .
In the display the indicator Tuning... appears briefly,
after this the sender group is shown once again.
Manual Station Search
1. Hold the button INFO pressed down until Manual
Tune appears in the display.
2. Press the button JOG MODE/SELECT .
3 Turn the multi adjustor VOLUME/SELECT slowly, and
with pauses, to the left or right in order to switch
through the various DAB channels for the sender
groups (5A - 13F). When a sender group is
found in a DAB channel, the name of the group
is indicated in the lower display line.
4. To select a found sender group, press the button
JOG MODE/SELECT . The first found sender of this sen-
der group appears and, next to it, the transmitter
number/the total number of available senders.
5. Turn the multi adjustor VOLUME/SELECT slowly, and
with pauses, to the left or right. In this way the
saved senders in this sender group can be switched
through.
6. When you have selected a sender, press the button
JOG MODE/SELECT . You then depart the manual station
search.
IB_KH2314_AR23585_LB3C 08.09.2008 15:44 Uhr Seite 6