Calling using voice tags – Kyocera S14 User Manual
Page 97
User Guide for the Kyocera S14 Opal phone
79
Calling using voice tags
1. Make sure there is a voice tag recorded for the person you want to call. If
there isn’t, see “Recording voice tags” on page 76.
2. From the home screen, press
. The phone responds: “Say a name.”
3. Say the name of the person you want to call.
4. If the name you said matches a contact in the Voice Dial List, the phone
responds: “Calling (Name).” Remain silent to make the call, or say
kçÒ
to cancel.
Note: If there are multiple names saved in the Voice Dial List that match the
name you said, you will be asked to verify which name you want to call.
Say
vÉëÒ
when you hear the correct name. Say
kçÒ
when you hear an
incorrect name.
5. When you are finished, press
. You cannot end the call with a voice
command.
Note: You can set the phone to prompt you to “say a name” as soon as you
open the flip:
•
Select
jÉåì=→=pÉííáåÖë=→=sçáÅÉ=pÉêîáÅÉë=→=^Енбо~нЙ=пбнЬ=cäáé=→ bå~ÄäÉÇK