Kawasaki KFX T4872 - Manual (Page 12)

12 P9723b-0920
• Fit the tab at the front of the seat into the slot near the drive
buttons A .
• “Snap” the tab at the back of the seat into the slot near the
rear of the vehicle B .
Seat
Drive Buttons
A
B
• Fit both hand grips on the ends of the handlebar.
Hint: If it is difficult to slide a hand grip onto the handlebar,
moisten the inside of the grip with water.
Hand Grip
Hand Grip
BACK VIEW
14
• Insert two #8 x 2" screws into the upper holes in the brush
guard and tighten.
15
• Locate the opening under the drive buttons.
• Reach into the opening and pull the high speed connector out
through the opening.
• See page 18 for information on high speed operation.
17
Connector
Drive Buttons
16