Kenwood KTC-D500E - Manual (Page 22)

22 KTC-D500E
Paste the remote control receiver to the dashboard.
1 Remove the paper from double-stick tape
and paste it on the back of the remote control
receiver.
2 Wipe the dirt and oil off from the installation area
and paste the remote control receiver 6 to the
dashboard.
3 Connect the connectors of the remote control
receiver to the main unit.
⁄
• Wipe oil and dirt off from the installation surface.
• Avoid area where there is direct sunlight or close to TV
monitor because the remote control signals may be
affected.
Remote control receiver 4
Remote control
receiver
4
Digital TV Tuner 1
Installing and Connecting the Remote Control Receiver