Specifications 3 – Kicker VS12L5 EN User Manual
Page 3
(Mounting cont.)
Model
Woofer Imp. Power
Top Bottom Height Width
Handling*
Depth Depth
(Watts) (In., cm) (In., cm) (In., cm) (In., cm)
VS8L5
S8L5
*2,4
300 8-1/2, 21.6 13-1/4, 33.7 11, 27.9 22-1/4, 56.5
V
VSS88LL77 SS88LL77 **22,,44 332255 88--11//22,, 2211..66 1133--11//44,, 3333..77 1111,, 2277..99 2222--11//44,, 5566..55
VS10L5
S10L5
* 2,4 450 11-7/8, 30.2 17-1/4, 43.8 12-1/2, 31.7 27-3/4, 70.4
V
VSS1100LL77 SS1100LL77 ** 22,,44 552255 1111--77//88,, 3300..22 1177--11//44,, 4433..88 1122--11//22,, 3311..77 2277--33//44,, 7700..44
VS12L5
S12L5
*2,4 600
12-1/2, 31.8 18-3/4, 47.6 14-5/8, 37.1 29, 73.6
V
VSS1122LL77 SS1122LL77 **22,,44 775500 1122--11//22,, 3311..88 1188--33//44,, 4477..66 1144--55//88,, 3377..11 2299,, 7733..66
NOTE:
*The two ohm unit should be used with the KX Series Class D amplifiers
KX550.3, KX700.5, KX400.1, and KX600.1. It is not recommended for use with
any KX two or four channel amplifiers.
The four ohm unit should be used with any KX Series two or four channel
amplifier. It is not recommended for use with any KX Series Class D ampli-
fiers.
The use of a subsonic filter will significantly increase the power handling.
The power handling specifications listed in the chart above include the use
of a 24 db/ octave subsonic filter. A minimum of 12dB/ octave subsonic fil-
ter is recommended.
Specifications
3