Krown Manufacturing KVT100 User Manual
Page 19
4. Press spacebar
The location’s label and the cursor will appear on the right end of the display.
5. Type the name and number
6. Press CTRL-9 to save.
“MEMORY SAVED” will appear on the display.
NOTE: Numbers can be separated with a “-” DASH but only numbers will be dialed. Letters and dashes will
not affect dialing. If needed for the operation of a special business system, a pause or delay in dialing string
can be inserted between numbers. Type a (+)PLUS for each one second delay needed .
DISPLAYING THE ENTIRE PHONE DIRECTORY
To display the entire phone directory
1. Press DIAL.
“TYPE NO., M(MEM)” will appear on the display.
2. Press “M” for memory.
“PH#1#-#9#, D(DIR)” appears.
3. Press “D” to display all the directory listings from 0-9. When finished, the display will read:
“PH#1#-#9#, K(KBD)”
4. Press CTRL-9 to exit.
17
CHAPTER 3: THE MEMORY