Speaker setup – Kodak SD-63HK User Manual
Page 17
17
You may adjust speaker volume balance and delay time according to your listening position.
Speaker setup
D
F
D
C
D
R
D
R
D
F
It is hopeful that the interval from the listener to each
speakers is same to get the best sound quality. If not,
you can adjust the delay time so that the sounds from
speakers will arrive simultaneously to the listener.
Centre speaker
Front Right speaker
Front Left speaker
Rear Left speaker
Rear Right speaker
Centre Delay
If the distance of D
C
is equal or longer than D
F
, set
the delay time to “0ms” using
B
B
B
B
B
or
A
A
A
A
A
.
If the distance of D
C
is shorter than D
F
, set the Cen-
tre Delay time using
B
B
B
B
B
or
A
A
A
A
A
as follows.
D
F
– D
C
Setting
30cm (approx.) 1ms
60cm (approx.) 2ms
90cm (approx.) 3ms
120cm (approx.) 4ms
150cm (approx.) 5ms
Surround Delay
If the distance of D
R
is equal or longer than D
F
, set
the delay time to “0ms” using
B
B
B
B
B
or
A
A
A
A
A
.
If the distance of D
R
is shorter than D
F
, set the Sur-
round Delay time using
B
B
B
B
B
or
A
A
A
A
A
as follows.
D
F
– D
R
Setting
150cm (approx.) 5ms
300cm (approx.) 10ms
450cm (approx.) 15ms
Volume
Test Tone
Set
Off
Centre Delay
0ms
Surround Delay
0ms
Tone
Bass Boost
Surround
SPKR Setup
BACD
/Enter/Return
Volume
Test Tone
Set
Off
Centre Delay
0ms
Surround Delay
0ms
BACD
/Enter/Return
Tone
Bass Boost
Surround
SPKR Setup
Press SPKR SETUP in DVD mode.
The “SPKR Setup” screen appears.
Press
C
C
C
C
C
or
D
D
D
D
D
to select “Volume”, “Test Tone”, “Centre
Delay” or “Surround Delay”.
Volume
You can adjust the volume level of each speaker.
1. Press ENTER or
A
A
A
A
A
. The “Volume” screen appears.
2. Press
B
B
B
B
B
or
A
A
A
A
A
to select the desired speaker.
3. Press
C
C
C
C
C
or
D
D
D
D
D
to adjust the volume level as desired
(“0” ~ “–10”).
4. Repeat steps 2 ~ 3 for other speakers.
5. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
You can also adjust the volume level of each speaker
in FM/AM or external input mode as follows.
1. Press SPKR SETUP. The setting display appears
on the display windows.
2. Press
C
C
C
C
C
or
D
D
D
D
D
to select the desired speaker.
3. Press
B
B
B
B
B
or
A
A
A
A
A
to adjust the volume level as desired
(“0” ~ “–10”).
4. If adjusting is complete, press SPKR SETUP or
ENTER.
Test Tone
You can adjust the sound balance of the speakers.
1. Press ENTER or
A
A
A
A
A
. The “Test Tone” screen ap-
pears. The test tone comes out for 3 seconds from
each speakers in the following order.
Front Left
Centre
Front Right
Rear Right
Rear Left
Sub Woofer
Front Left
...
2. If the test tone balance is not kept, press
C
C
C
C
C
or
D
D
D
D
D
to
adjust the volume level as desired (“0” ~ “–10”)
while the desired speaker is activating.
3. Repeat step 2 for other speakers.
4. Press SPKR SETUP or RETURN to close the
“SPKR Setup” screen.
Volume
Test Tone
Set
Off
Centre Delay
0ms
Surround Delay
0ms
BACD
/Enter/Return
Tone
Bass Boost
Surround
SPKR Setup
Volume
Test Tone
Set
Off
Centre Delay
0ms
Surround Delay
0ms
B
Front Left
A
Vol.00
BACD
/Enter/Return
Tone
Bass Boost
Surround
SPKR Setup
Volume
Test Tone
Set
On
Centre Delay
0ms
Surround Delay
0ms
Front Left
Vol.00
BACD
/Enter/Return
Tone
Bass Boost
Surround
SPKR Setup
Press SPKR SETUP or RETURN to close the “SPKR
Setup” screen.
2D20401A P16-23
26/9/03, 6:02 PM
17